Transform your van into a cozy, all-season home with our premium insulated campervan window covers. Designed for optimal vanlife comfort, these magnetic window covers provide superior temperature regulation, keeping your campervan cool in the summer and warm in the winter. Our 100% blackout covers also guarantee total privacy and a restful night's sleep, making them a must-have van conversion kit accessory for any vanlifer or RVer.
Install these covers to instantly improve the safety, privacy, and temperature regulation in your van! Check the specific instructions for your van in our Installation Instructions below.
Features:
-
Super Easy to Install. Install and remove in just seconds. Installation is fully magnetic; no drilling or suction cups are required.
-
Strong, Heavy Duty Magnets. To ensure the perfect fit, each magnet is strategically and carefully sewn in place.
-
Compact and Foldable. When not in use, they can be folded up in a compact size for storage.
-
Stealth Camping. They fit snug against your windows, blocking out 100% of light. These window covers are also ideal to provide complete privacy.
-
Temperature Regulation. Crafted with thick, premium insulation, these window covers will keep your van cool in the summer and warm in the winter. They will block out the elements in even the most severe weather conditions.
Specifications:
-
Material: Made from recycled PET fabric with yarn extracted from recycled mineral water and Coke bottles, UV50+ ripstop polyester, fiberglass rods, double faced aluminium crosslinked PE foam insulation, and rare earth magnets
-
Colour: Light Grey (internal) and Black (external)
-
Compatibility: Mercedes Sprinter 2007 to Current
Installation Instructions:
Full Metal Rear Door
1. With the black side against the glass, place the cover on the back door window. The magnets will easily latch to the metal sides of the window frame.
2. Ensure all edges are securely aligned on the window.
Full Plastic Rear Door
1. Align the metal tabs with the magnets on the window cover and press them into place. Ensure the 3M adhesive side of the tab is facing outward to stick to the window frame.
2. Clean the glass area around your window frame using the provided alcohol pad.
Focus on the glass section closest to the plastic frame, as this is where the metal tabs will be installed.
3. Hold the window cover against the window to find the correct tab placement. Align the cover so that the built-in magnets sit against the glass near the plastic frame. Mark or take note of these spots, this is where you'll attach the metal tabs.
4. Remove the backing from the tape and attach it to the clean window frame, aligning it with the magnets. Repeat for all magnet locations.
Note: Be cautious not to touch the adhesive side of the tab, as moisture from your hands may affect the bond. For best results, allow the metal tabs to fully cure, it reaches 50% strength in 20 minutes, 90% in 24 hours, and full strength in 72 hours. Avoid removing or stressing the metal tabs during this period.
5. Carefully attach the window cover to the frame.
Half Plastic Rear Door
1. Clean your window frame using the provided alcohol pad.
2. Hold the window cover against the window frame to find the right placement for the metal mounting tabs. Align them with the magnets inside the window cover trim.
3. Remove the backing from the tape and attach it to the clean window frame, aligning it with the magnets. Repeat for all magnet locations.
4. Carefully attach the window cover to the frame.
5. Be cautious not to touch the adhesive side of the tape, as the moisture from your hands may damage the adhesive.
